Zurück Back to the product overview page
Tapes

Securing and Finishing of all Rounded and Diagonal Edges

Bias Tape

Flexible iron-on, grain-reinforced bias binding for finishing all rounded and diagonal edges.

Colors:

weiss
grafit

Properties:

Mediumweight, bias-cut fusible tape made from synthetic fibres and with a reinforcement stitch.

soft
firm
light
heavy
stable
elastic
thin
voluminous

Weight

54 g/m²

Sales unit

12 mm x 100 m
SB: 12 mm x 5 m

Composition

83% PA, 17% PES

Application areas

Securing of bias-cut or round edges. Suitable across a wide range of fabrics.

Processing

  1. The bias tape is 12 mm wide and has a chain stitch at 4/8 mm from the edge. Iron on the tape in such a way that the 8 mm side meets the fabric edge and is sewn right behind the chain stitch.
  2. Slowly and firmly iron on for around 8 seconds per section. Iron dry.

Advantages

    • Secures and finishes all round and diagonal edges
    • Versatile in application
    • No stretching of the edges thanks to the chain stitch
    • Flat, soft stitch-and-fold edges

Fusing condition

Hand iron:

dry

Time:

8 s

Care recommendation

Wash at 40 °C
To clean with perchloroethylene

Class I

weiss

Class II

grafit

All information contained in this document corresponds to our current knowledge and assumptions and is granted without guarantee or representation of being exhaustive or correct. It is only an indication for your own internal evaluation, and shall not substitute for any assessment you may need to conduct to determine the suitability of the product for your particular purposes. Freudenberg assumes no liability or responsibility for the completeness or accuracy of the information contained herein. These are regularly reviewed. The product brands marked ® are registered trademarks of companies that are part of the Freudenberg Group in several countries and regions.

We recommend testing the products before using them in your project.