Zurück Back to the product overview page
Tapes

For Securing Edges

Edge Tape

Strengthened grain stabilises fabric and protects against stretching, e.g. for front edge on jackets and coats, lapel break, armholes, etc.

Colors:

weiss
grafit

Properties:

Lightweight fusible tape made from synthetic fibres, with stabilising vertical threads.

soft
firm
light
heavy
stable
elastic
thin
voluminous
Download
Product Datasheet
Product Datasheet-Edge Tape-en.pdf
Warning notice

Weight

43 g/m²

Sales unit

20 mm x 100 m
SB: 20 mm x 5 m

Composition

100% PA

Application areas

For the stabilising of straight edges of e.g. shoulders, facings etc. on blazers, jackets and coats. Suitable for all fabrics.

Processing

  1. Place in the appropriate shape and iron on with light pressure for around 8 seconds per section. For rounded sections, make little folds and iron on in the required shape.
  2. Do not cut into it, as this will cut the stabilising lengthwise threads.
  3. After fixing, lay the pieces down flat to cool down for around 20 minutes to allow the bond to stabilise.

Advantages

    • No stretching
    • Easy to iron on
    • Retains a perfect shape long term

Fusing condition

Hand iron:

dry

Time:

8 s

Care recommendation

Wash at 40 °C
To clean with perchloroethylene

Class I

weiss

Class II

grafit

All information contained in this document corresponds to our current knowledge and assumptions and is granted without guarantee or representation of being exhaustive or correct. It is only an indication for your own internal evaluation, and shall not substitute for any assessment you may need to conduct to determine the suitability of the product for your particular purposes. Freudenberg assumes no liability or responsibility for the completeness or accuracy of the information contained herein. These are regularly reviewed. The product brands marked ® are registered trademarks of companies that are part of the Freudenberg Group in several countries and regions.

We recommend testing the products before using them in your project.