Zurück Back to the product overview page
Tapes

For Accurate Button Plackets, Cuffs, Slits, etc.

Edgefix

The quick helper for every purpose! For accurate button borders, cuff bands, slits, seams, pockets and facings on blouses, dresses as well as the effortless reversing of internal seams on jackets and coats.

Colors:

weiss
grafit

Properties:

Lightweight fusible tape made from a blend of synthetic fibres with a perforated line.

soft
firm
light
heavy
stable
elastic
thin
voluminous

Weight

46 g/m²

Sales unit

40-10 mm x 50 m

Composition

50% CV, 50% PES

Application areas

For the accurate processing of button plackets, cuffs, slits, pockets and pocket flaps; may also be used for hems on jackets and coats. Suitable for all fabrics.

Processing

  1. Lay the interlining with the coated side facing the reverse side of the fabric.
  2. Iron for around 8 seconds, section by section, with a damp cloth. Do not push the iron.
  3. After fixing, lay the pieces down flat to cool down for around 20 minutes to allow the bond to stabilise.

Advantages

    • No pre-marking
    • The perforated line also serves as a guide for folding and sewing
    • Thin, precise edges

Fusing condition

Hand iron:

with damp cloth

Time:

8 s

Care recommendation

Wash at 40 °C
To clean with perchloroethylene

Class I

weiss
grafit

All information contained in this document corresponds to our current knowledge and assumptions and is granted without guarantee or representation of being exhaustive or correct. It is only an indication for your own internal evaluation, and shall not substitute for any assessment you may need to conduct to determine the suitability of the product for your particular purposes. Freudenberg assumes no liability or responsibility for the completeness or accuracy of the information contained herein. These are regularly reviewed. The product brands marked ® are registered trademarks of companies that are part of the Freudenberg Group in several countries and regions.

We recommend testing the products before using them in your project.