Zurück Back to the product overview page
Tapes

For Clothing and Textile Craftwork

Bondaweb® Tape

Two-sided iron-on adhesive medium tapes in 6, 10 and 25 mm width. For bias tapes, belt straps, and many more.

Colors:

transparent

Properties:

Iron-on tape with adhesive on transfer paper.

soft
firm
light
heavy
stable
elastic
thin
voluminous
Download
Product Datasheet
Product Datasheet-Bondaweb® Tape-en.pdf
Warning notice

Weight

28 g/m² + Papier

Sales unit

6 mm x 5 m/10 mm x 5 m
25 mm x 5 m

Composition

100% PA

Application areas

For ironing onto bias-cuts fabric strips used for Tiffany patchwork, braid patchwork, belt loops, for the processing of hems and lots more.

Processing

  1. Lay the Bondaweb with the rough side on the reverse side of the fabric and iron on for around 5 seconds and then leave to cool down.
  2. Remove the backing paper and fold over the fabric.
  3. Iron for around 10 seconds with a damp cloth, section by section, so that the fabrics fuse together. Do not push the iron.

Advantages

    • Adhesive on both sides
    • Easy to work with

Fusing condition

Hand iron:

with damp cloth

Time:

10 s

Care recommendation

Wash at 60 °C
To clean with perchloroethylene

Class I

transparent

All information contained in this document corresponds to our current knowledge and assumptions and is granted without guarantee or representation of being exhaustive or correct. It is only an indication for your own internal evaluation, and shall not substitute for any assessment you may need to conduct to determine the suitability of the product for your particular purposes. Freudenberg assumes no liability or responsibility for the completeness or accuracy of the information contained herein. These are regularly reviewed. The product brands marked ® are registered trademarks of companies that are part of the Freudenberg Group in several countries and regions.

We recommend testing the products before using them in your project.