Zurück Back to the product overview page
Range of Interlinings for Apparel
Recycling Icon

For Small Parts and Front Parts

Fusible Interlining H 180

Especially soft and lightweight interlining for small parts as well as front parts of jackets etc. made of very lightweight to mediumweight outer fabrics.

Colors:

weiss
black

Properties:

Lightweight, soft and fine fusible nonwoven interlining made from synthetic fibres.

soft
firm
light
heavy
stable
elastic
thin
voluminous

Weight

37 g/m²

Sales unit

90 cm x 25 m

Composition

85% PA, 15% R-PES

Application areas

For the fusing of small parts on blouses and shirts and if front parts. Suitable for lightweight fabrics.

Processing

  1. Lay the interlining with the coated side facing the reverse side of the fabric.
  2. Iron on for around 12 seconds with a damp cloth.
  3. Press the iron down firmly over each section 5–6 times. (Iron setting: silk/wool). 4. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise.

Advantages

    • Outstanding bond on difficult, fashion fabrics such as viscose, acetate and cupro
    • Easy to iron-on
    • Soft, comfortable texture

Fusing condition

Hand iron:

with damp cloth

Time:

12 s

Care recommendation

Wash at 40 °C
To clean with perchloroethylene

Class II

weiss
black

All information contained in this document corresponds to our current knowledge and assumptions and is granted without guarantee or representation of being exhaustive or correct. It is only an indication for your own internal evaluation, and shall not substitute for any assessment you may need to conduct to determine the suitability of the product for your particular purposes. Freudenberg assumes no liability or responsibility for the completeness or accuracy of the information contained herein. These are regularly reviewed. The product brands marked ® are registered trademarks of companies that are part of the Freudenberg Group in several countries and regions.

We recommend testing the products before using them in your project.