Zurück Back to the product overview page
Range of Interlinings for Apparel
Recycling Icon

Mediumweight fusible interlining for small parts

Fusible Interlining H 310

Mediumweight, stable, fixable non-woven interlining made from synthetic fibres

Colors:

weiss

Properties:

Mediumweight, stable fusible nonwoven interlining made from synthetic fibres.

soft
firm
light
heavy
stable
elastic
thin
voluminous
Download
Product Datasheet
Product Datasheet-H 310-en.pdf

Weight

63 g/m²

Sales unit

90 cm x 25 m

Composition

100% R-PES

Application areas

For the fusing of small parts such as bonnets, trims, collars, waistbands and bows as well as for tiebacks and trims on Roman blinds, pelmets and pillows.

Processing

  1. As with all interlinings from Vlieseline, this interlining is always cut lengthwise following the direction of the thread.
  2. Place the interlining on the reverse side of the fabric with the coated side facing down, cover with a damp cloth and iron section by section for around 12 seconds. Do not push the iron.
  3. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise.

Advantages

    • Washable up to 60°
    • Retains its shape

Fusing condition

Hand iron:

with damp cloth

Time:

12 s

Care recommendation

Wash at 40 °C
To clean with perchloroethylene

Class II

weiss

All information contained in this document corresponds to our current knowledge and assumptions and is granted without guarantee or representation of being exhaustive or correct. It is only an indication for your own internal evaluation, and shall not substitute for any assessment you may need to conduct to determine the suitability of the product for your particular purposes. Freudenberg assumes no liability or responsibility for the completeness or accuracy of the information contained herein. These are regularly reviewed. The product brands marked ® are registered trademarks of companies that are part of the Freudenberg Group in several countries and regions.

We recommend testing the products before using them in your project.