Zurück Back to the product overview page
Range of Interlinings for Apparel

For Front Parts and Small Parts

Fusible Interlining H 410

Soft interlining with stabilizing vertical threads; suitable for front parts of jackets etc. as well as for small.

Colors:

weiss
grafit

Properties:

Mediumweight, soft fusible nonwoven interlining made from synthetic fibres, with stabilising vertical threads preventing distortion outer fabrics.

soft
firm
light
heavy
stable
elastic
thin
voluminous

Weight

43 g/m²

Sales unit

90 cm x 25 m

Composition

77% PA, 23% PES

Application areas

For the fusing of front parts on coats and longer jackets and small parts succeptible to distortion. Suitable for light- to mediumweight fabrics.

Processing

Important: The lengthwise thread of the fusible interlining should match the thread direction of the fabric.

  1. Place the interlining on the reverse side of the fabric with the coated side facing down, cover with a damp cloth and iron section by section for around 12 seconds. Do not push the iron.
  2. After fixing, lay the pieces down flat to cool down for around 30 minutes to allow the bond to stabilise.

Advantages

    • Very high stability thanks to lengthwise thread direction.
    • Soft, comfortable texture

Fusing condition

Hand iron:

with damp cloth

Time:

12 s

Care recommendation

Wash at 40 °C
To clean with perchloroethylene

Class II

weiss
grafit

All information contained in this document corresponds to our current knowledge and assumptions and is granted without guarantee or representation of being exhaustive or correct. It is only an indication for your own internal evaluation, and shall not substitute for any assessment you may need to conduct to determine the suitability of the product for your particular purposes. Freudenberg assumes no liability or responsibility for the completeness or accuracy of the information contained herein. These are regularly reviewed. The product brands marked ® are registered trademarks of companies that are part of the Freudenberg Group in several countries and regions.

We recommend testing the products before using them in your project.